An oxygen meter is a fairly reliable and accurate instrument for the determination of dissolved oxygen in any liquid. This equipment works through a probe that captures oxygen, being the very sensitive probe, a series of maintenance processes are recommended to ensure accurate measurements. The electrolyte solution should be kept at the set level and should be replaced periodically.
When using this equipment it is important to avoid air bubbles when the cap is screwed to the probe. It is also recommended that the meter be calibrated periodically in air to reset the values back to 100% (and in zero oxygen solution, where necessary). Following these easy suggestions, the oxygen meter will always remain accurate and reliable.
Economy online dissolved oxygen controller, 1 or 2 points calibration, 4 to 20mA outputs. The meter is suitable...
High-accuracy multiparameter water quality meter contains 15 options, the meter is suitable for measuring...
Professional benchtop dissolved oxygen meter, 7 inch TFT display, stores up to 1000 data sets, setup menu...
Precision laboratory dissolved oxygen meter, 1 or 2 points calibration, setup menu contains 9 options, accuracy...
• Economical benchtop dissolved oxygen meter is equipped with a backlit LCD display.
• 1 or 2 points calibration using the air-saturated water or zero oxygen solution.
• Salinity and barometric pressure compensations eliminate the measurement error.
• Automatic temperature compensation ensures accurate readings over the entire range.
• Auto-Read function senses and locks the measurement endpoint.
• Setup menu allows setting the number of calibration points, concentration unit, temperature
unit, auto-power off, etc.
• Reset function automatically resumes all settings back to the factory defaults.
| Model | YR01834 |
| Dissolved Oxygen | |
| Range | 0.0 to 20.0mg/L |
| Resolution | 0.1mg/L |
| Accuracy | ±0.5mg/L |
| % Saturation of Oxygen | |
| Range | 0.0 to 200.0% |
| Resolution | 0.1% |
| Accuracy | ±2.0% |
| General Specifications | |
| Calibration Points | 1 or 2 points |
| Temperature Compensation | 0 to 40°C/32 to104°F, automatic |
| Pressure Correction | 60.0 to 112.5kPa/450 to 850mmHg, manual |
| Salinity Correction | 0.0 to 35.0g/L, manual |
| Sensor Type | DO100 polarographic probe |
| Connector | 6-pin nimi-DIN |
| Display | Custom LCD (120×60mm) |
| Power | DC9V, using AC adapter, 220V/50Hz |
| Dimensions | 210(L)×205(W)×75(H)mm |
| Weight | 1.5kg |
| Order Code | Accessories |
|
YR01834
|
DO100 dissolved oxygen electrode |
| DO electrolyte solution | |
| DO membrane cap | |
| DC9V power adapter |
An oxygen meter is a laboratory equipment that is used to determine the amount of dissolved oxygen in liquids...
Dissolved Oxygen (DO) is the measure of the amount of oxygen that is distributed in a system. Measurements...
Dissolved oxygen is the amount of oxygen dissolved in water, commonly recorded as DO, and expressed in...
The use of oxygen meters is currently essential to speed up quality testing in the dairy sectors, as it makes...
Dissolved Oxygen (DO) is the gaseous oxygen that is dissolved in an aqueous solution, it is also defined as the measure..
Oxygen meters are devices that use the amount of oxygen that is dissolved in or transported by a fluid, that is...
Dissolved oxygen meters are equipment that meets the trend of calculating the state of wastewater, computed and...
It is important to note that there are different devices to measure these standards. In turn, the choice of these will depend on the use given to them in the laboratories. Its value lies in knowing the quality, physical and chemical characteristics of water...
To know the price of Dissolved Oxygen Meters we invite you to send us an email with your request through the contact form..
Of course, you can request a quote for the Kalstein team of your interest, directly from our official website. Once you have identified your preferred model, click HERE
