Distilled water should be used, as it is considered to be a pure water, not weighing chlorine or minerals, which may cause some kind of reaction or boil that could damage the sample or equipment; has a pH of around 7, making it a neutral p, there are different types of distilled water that are classified by their purity level; they are classified through their chemical and physical properties.
Distilled water is used to prevent the embedding of metal ions on the resistance, this water is widely used not only in the baths of mary but in the different uses of the laboratory, to clean the equipment, prepare samples since it is free of electrolytes and mineral salts, in addition it is insulating and repels magnetism, and above all distilled water is used because its boiling point is higher than ordinary tap water.
Oil baths are essentially the same as water baths with the difference that some oil is used instead of water. They are suitable when the temperatures to be reached exceed 100 ° C. For these baths it is important to use very thick-walled beakers to contain the oil.
Because oils have a high heat capacity and heat slowly, it may be helpful to partially heat the bath oil while the experiment is being set up.
Transparent water bath is a common piece of equipment in many laboratories. It is used for a variety of tasks, including culture incubation, serologic sample testing, and warm-up reagents. The bathroom uses a heating element to maintain a constant temperature, usually between 37 and 60 degrees Celsius. The water is kept circulating by a pump, and the level is maintained by a float switch.
The toilet is usually placed on a bench or in an extractor hood, and connected to an outlet. The equipment should be filled with distilled water before use. The water level should be checked regularly, and the bath should be emptied and refilled when necessary.
YR series heating circulating bath provide room temperature to 100℃, 200℃, and can be customized ...
YR Circulation bath is specially used for viscometers, high temperature control accuracy, low fluctuation ...
It contains refrigerating system, heating system, pre-cooling system, three systems can be used continuously...
YR transparent water bath series is with transparent chamber design, with big improvement on...
| Model (Integrated Chamber) | YR05066 | YR05067 | YR05068 | YR05069 | YR05071 | YR05072 | YR05073 | YR05074 | |
| Controller | PID | ||||||||
| Voltage | 220V / 50Hz 110V / 60Hz | ||||||||
| Power (W) | 300W | 600W | 800w | 1 200w | 300W | 600W | 800w | 1 200w | |
| Temperature – Range °C | RT +5~100 °C | ||||||||
| Temperature Resolution | 0.1°C | ||||||||
| Temperature Fluctuation | ≤± 0.5°C | ||||||||
| Division Accuracy | ≤± 1°C | ||||||||
| Timer | 999 minutes | ||||||||
| Safety | Overcurrent protection, Over temperature alarm; Prevent dry burning function | ||||||||
| Chamber Size (mm) | 160x160x130 | 305x160x130 | 305x305x130 | 470x305x130 | 160x160x130 | 305x160x130 | 305x305x130 | 470x305x130 | |
| Product Size (mm) | 200x200x220 | 345x200x220 | 345x345x220 | 510x345x220 | 200x200x220 | 345x200x220 | 345x345x220 | 510x345x220 | |
| Packing Size (mm) | 250x250x270 | 400x250x270 | 400x400x270 | 550x400x270 | 250x250x270 | 400x250x270 | 400x400x270 | 550x400x270 | |
| Net Weight | 3 Kg | 4 Kg | 6 Kg | 8 Kg | 3 Kg | 4 Kg | 6 Kg | 8 Kg | |
| Gross Weight | 3.5 Kg | 5 Kg | 7 Kg | 9 Kg | 3.5 Kg | 5 Kg | 7 Kg | 9 Kg | |
An oil bath is a thermostatic equipment used in chemical research laboratories to transfer heat indirectly...
This equipment has varied and indispensable applications in the laboratories, thanks to its hot water...
Biopreservation is the science of protecting biological samples for future use. Samples may be retained...
A water bath is a laboratory equipment consisting of a container filled with hot water, used to incubate ...
A recirculation bath is a laboratory device, consisting of a water bath with a built-in water recirculation pump, an ideal ...
Transparent water bath is a common piece of equipment in many laboratories. It is used for a variety of tasks, including...
Water baths are equipment that allows maintaining a uniform temperature necessary for different tests and laboratory...
Water baths are used in a variety of studies and tests, including enzymatic reaction studies, growth observational studies, cellular transport studies and more. In general, a water bath is used to maintain a solution at a specific temperature for a specified period of time...
To know the price of the Water Baths we invite you to send us an email with your request through the contact form.
The delivery time of your Kalstein product will depend on the following:
- Delivery Time (Air): 15-30 days.
- Delivery Time (Maritime): 45-60 days.
- Delivery Time (Air): 30-60 days.
- Delivery Time (Maritime): 60-90 days.
You can purchase through:
Of course, you can request a quote for the Kalstein team of your interest, directly from our official website. Once you have identified your preferred model, click HERE
